Paddle Board Bike Racks are the easiest way to move your paddle board to your water sports location without any extra cost. If you are living near your water sports spot, you don’t have to hire a car every time to move it to your place. By using a bike, you can warm up your legs before going to paddle boarding.
There are a large number of bike racks available. You can read the full review to select the best paddle board bike rack according to your need. I hope you will enjoy reading this review.
Table of Contents
- Best Paddle Board Bike Racks 2019
- 1. Moved By Bikes – MBB Surfboard Bike Rack Review
- 2. Carver Surf Racks – Carver Surfboard Bike Rack Review
- 3. Wheele Racks – The Wheele SUP Bike Trailer Bicycle Review
- 4. Carver Surfboard Bike Rack Review
- 5. SUP Wheels Evolution SUP Carrier Review
- 6. Bike Balance Surfboard Bike Rack Kit Review
- 7. Cor Surf Surfboard Bike Rack for Shortboards Review
Best Paddle Board Bike Racks 2019
|Moved By Bikes – MBB Surfboard Bike Rack||Moved By Bikes||Check Price|
|Carver Surf Racks – Carver Surfboard Bike Rack||Carver Surf||Check Price|
|Wheele Racks – The Wheele SUP Bike Trailer Bicycle||Wheele Racks||Check Price|
|Carver Surfboard Bike Rack||Carver||Check Price|
|SUP Wheels Evolution SUP Carrier||SUP Wheels||Check Price|
|Bike Balance Surfboard Bike Rack Kit||Bike Balance||Check Price|
|Cor Surf Surfboard Bike Rack for Shortboards||Cor Surf||Check Price|
1. Moved By Bikes – MBB Surfboard Bike Rack Review
Moved By Bikes is a large California company that has been serving some legitimate bike carriers for over seven years. The surfers stated that they used the MBB shelf to transport paddling and SUP of up to 11ft long and a board weighing more than 25 kg. I have picked this bike as the Best Paddle Board Bike according to the users reviews.
It is made of anodized aluminum with stainless steel equipment and comes in silver black. Aluminum is fantastic because it does not rust. It is designed to be mounted directly to the frame along the steering tube of the bike frame and at the back of the seat post.
This Moved By Bikes bike rack is designed to be the best rack you can buy. As they are mounted correctly for your frame, they are very stable even with longboards. However, your shortboard will be beautiful and stylish. The rear support is for your seat post or rear frame, your decision, an exceptional frame is not necessary.
The slotted bars slide in the assembled tubes and are kept configured with a direct drive hitch discharge. Press the latch to eject them, slide them until the lock clicks into place, it’s as simple as that. It makes no sense to handle the bars on your bike when you’re not using them.
You can also configure it to be mounted on your load rack, even if you have one. We love the quick release arms that allow you to remove it from your bike without complaining or fighting! In general, it is mainly versatile and probably the most versatile frame of the resume.
It weighs less than 5 pounds, so you will not feel like a burden to walk with it. MBB has some distinctive structures in its alignment. However, we think the original side frame is the best to date.
The design of the bar spline means that all that is expected is a simple retainer to anchor the bars to the brackets in its frame. Just push a plug to eject it when you get home after your surfing session.
It is easy to install, all you need is a small wrench to tighten the bolts. It provides in most 25.4mm to 31.8mm seat posts and adjustable lower arms.
- Mountable on adjustable lower arms and rear seat post/rack
- Foam Padding on the Tubes
- Recommended for boards about 12 feet/25lbs
- Aluminum curved paddle holding arms
- Stable frame mounting
- Rubberized clamps
- Works with lighter Paddleboards
2. Carver Surf Racks – Carver Surfboard Bike Rack Review
Carver Surfboard Bike Rack is the second best paddle board bike in my shortlist. Carver Racks is a small and large company based in Oahu that was founded in 2003 and has been making extraordinary shelves since that time. They have built this paddle board bike rack with durability in mind.
Your Carver Longboard Rack is an integrated rack that mounts to the back of most standard bikes. It is manufactured with solid aluminum construction to a great extent that will not only stand the test of time but will also resist oxidation.
The aluminum tubes also accompany the filling to secure the rails, the best and the base of your board. While Carver offers a variety of racks for boards and configurations of varying sizes, this rack will fit into tables up to 4 inches thick and 10 feet long, later called longboard model with thicker arms.
In case you have to carry your SUP, it is also extremely comfortable to drive. With a soft and basic design, this rack’s frame is ideal for cruisers and bikes without suspension.
Extraordinary integrated bike carrier system to transport your board to the coast. Aluminum tubular system remarkably designed as a whole, resistant and with a careful design.
These will fit most tables and for the crabby model to most mopeds and bikes. Also, you will notice that the bike rack is an environmental friendly rack.
- TIG welded 6061 alloy
- Aluminum curved paddle holding arms
- Adjustable lower arms
- Rubberized clamps
- Comes with full installation hardware
- Durable construction to fit most non-suspension bikes
- Color: Black
- Issues with paddle board nose and tail not attaching properly
3. Wheele Racks – The Wheele SUP Bike Trailer Bicycle Review
If you do not need the tow handle and you have to tow your paddling board using your hands, then you require going this classic version of the bicycle attachment board carrier.
The truth is that most of the time if you pull your paddling boards by hand, you will have the option of placing two paddle boards on one of the 2-wheel paddling board rack.
It is impeccable in the case where you must also transmit the meeting of your child, your companion or any other person worthy of mention. It’s possible to pull a rowing board on a bike.
This Paddle board bike rack has worked upside down in the harsh conditions of sand and salt water, and you will be assured that this paddling board rack with wheels will fulfil your wishes. It accompanies the manufacturer’s 1-year limited warranty. However, you can predict that it will last more than that.
This paddling board rack comes with a net which will let you to connect to two pallets. This element also includes a tab that will enable you to transmit most of your Center SUP adaptations with one hand!
In case you need a hands-free means of transport, place the handle around your saddle. That will let you easily slide your board and row behind you to shore or lake!
The rowing tables are considerable, and the huge pains are to bring your board back to the water. The rack trailer makes it much more advantageous and enjoyable to reach your most desired paddle point.
The wheele trailer have two 13.5 inches strong rubber wheels which will never be leveled, and that can, without stretching too much, jump over steps, curbs, and this is only the visible part of the iceberg.
You can undoubtedly maneuver your SUP on the grass, sand, and sidewalk. By mounting this rack on your bike, you will be benefiting from saving time and energy when moving your paddling board from and to the beach.
- Aluminum curved holding arms
- Cushion padded durable arms
- Collapsible design
- Hard rubber wheels
- 28 inches wide frame
- Two 15.5 inches wheels
- 1.75 inches wheels/tires
- Not suitable for iSUP due to inflatable SUP thickness
4. Carver Surfboard Bike Rack Review
Transporting shortboards is much easier with this Carver bike rack. The rack can comfortably hold shortboards that are 8 feet long. One great thing about the rack is it can fit most bikes.
During transportation, the rack does not crush, scratch, or mar your bike. This is all thanks to the durable Tig Welded alloy material. This material is sturdy yet lightweight.
You can easily carry it around without experiencing any fatigue. The alloy material also prevents the rack from rusting.
This Carver paddle board Bike Rack falls short in two areas. First, the joints holding the board tends to slip into a slot. It is sometimes impossible to take them out. The second flaw has to do with balance.
The rack does not come with a mounting system. This makes it challenging to put the board on or take it off your bike. The weight of the boards also tend to turn the seat of your bike. You need to keep readjusting for it to be balanced.
- Tig Welded 6061 Alloy construction
- Adjustable lower arms
- Holds short boards that are up to 8 feet
- It is not well balanced
- Doesn’t have a mounting system
5. SUP Wheels Evolution SUP Carrier Review
This surfboard paddle board bike carrier comes with a comfortable Handle Strap System. The system connects the carrier to the seat of your bike. The carrier can comfortably fit paddle boards such as long race, standard, surfboard, and even inflatable boards. They make biking or walking your boards to the beach less stressful.
The carrier comes with durable wheels known as the Never Go Flat Wheels. These wheels work great in all types of surfaces. You can use it on hard road surfaces, rough dirty paths as well as on sandy beaches. The SUP wheels make it easy to maneuver the carrier.
There is a paddle holder that enables you to have a free hand that you can use to hold other items such as your phone. The carrier does not require any assembly.
You can remove the hand strap and configure it to carry 2 boards that are strapped together. If the weight is too much though, the wheels might become shaky.
The boards lie horizontally on the carrier. This protects them from issues with the wind. With this SUP Wheels carrier, you don’t have to worry about accidentally dropping down your board and damaging it.
The carrier can also float on water. This feature comes in handy when it gets in water by mistake.
It is constructed from a high-quality aluminum material that makes it to be durable. The carrier is also made from materials that are resistant to salt water and UV radiation. The SUP wheels can be folded into a briefcase size.
This compact feature makes it easier for you to store it. Before purchasing this SUP Wheels carrier, you have to make sure that it will be compatible with your bike. Unfortunately, this carrier does not work well with some bikes.
Another thing to keep in mind is to always tighten the board on your carrier. If the board is not tight enough, it can get damaged.
- Handle strap system
- Never Go Flat Wheels
- Fits all types of boards
- Removable hand strap
- Paddle holder
- If not set up correctly, can damage the board
- Not compatible with some bikes
6. Bike Balance Surfboard Bike Rack Kit Review
The rear mount design of this paddle board bike rack enables it to fit most multi-speed and single-speed bikes. This design also makes it easier to maneuver through traffic. It is constructed from a sturdy Tig Welded 6061 Aluminum material and has stainless steel components that contributes to its durability.
The rack enables you to carry up to 2 shortboards. The installation hardware makes it easy to set up the rack. One good thing about this Bike Balance rack is it does not rust or leave scratches on your bike or surfboard.
In addition to this, the rack can be easily adjusted to suit your needs.
The company states that the carrier is not suitable for disc brakes and rear suspension bikes. Despite this fact, there are still some people who have successfully mounted their boards on disc brake bikes.
Even though it is possible to mount it on these bikes, it is best to adhere to the instructions of the manufacturer. This will prevent you from dealing with nasty surprises in the future.
The instruction manual may give you a hard time trying to figure out how you can set up the rack. The manual only consists of images and does not explain the procedure to be followed.
In case you get stuck, you can simply watch some videos online or get someone else to set it up for you.
- Rear mount design
- Made from Tig Welded 6061 alloy material
- Fits most multi-speed and single-speed bikes
- Carries up to 2 surfboards
- Doesn’t work with disc brakes and rear suspension bikes
- Instruction manual is not detailed
7. Cor Surf Surfboard Bike Rack for Shortboards Review
This Cor Surf paddle board bike rack is made from durable Aluminum and stainless steel material. The rack is used to transport shortboards that are up to 8 feet long and 4.5 inches wide.
The adjustable length arms enable it to fit on most bikes. All you have to do is mount it directly to your bike’s seat post and you’ll be good to go. To install it, you need to use the 5 mm Hex Key that comes with the rack.
You can tighten the bungee to get your preferred length. This ensures your board stays safe and secure. There is also an integrated rear rack that allows you to mount your board to the rear of your bike.
- Constructed from aluminum and stainless steel
- Bright Green Foam Padding
- Carries shortboards that are up to 8 feet and 4.5 inches thick
- Integrated rear rack
- Adjustable length arms
- Difficult to tighten the bungee
Best Paddle Board Shoes Review